Solaris

*WARNING* *WARNING* *WARNING*
*USE WITH EXTREME CARE!!!!!!!!!!!!*
This will delete slices 0,1,3,4,5,6 of many disks (all your “emcpower*” disks) in your solaris system:

echo | format | grep -i emcpower | awk '{ print $2 }'| while read d;do
printf "p\np\n0\n\n\n0\n0\nlabel\ny\nquit\n" |format -d $d
printf "p\np\n1\n\n\n0\n0\nlabel\ny\nquit\n" |format -d $d
printf "p\np\n3\n\n\n0\n0\nlabel\ny\nquit\n" |format -d $d
printf "p\np\n4\n\n\n0\n0\nlabel\ny\nquit\n" |format -d $d
printf "p\np\n5\n\n\n0\n0\nlabel\ny\nquit\n" |format -d $d
printf "p\np\n6\n\n\n0\n0\nlabel\ny\nquit\n" |format -d $d
done

cfgadm -al | grep -i fabric  | awk '{ print $1 }'| while read hba;do
luxadm -e forcelip /dev/cfg/${hba}
done

My jumpstart install uncompresses the flar but leaves the server without bootblock or zfs bootpool, to fix this i install the bootblock and set the zpool’s bootfs property

# zpool status
  pool: rpool
 state: ONLINE
 scan: none requested
config:

        NAME          STATE     READ WRITE CKSUM
        rpool         ONLINE       0     0     0
          mirror-0    ONLINE       0     0     0
            c0t0d0s0  ONLINE       0     0     0
            c0t1d0s0  ONLINE       0     0     0

# installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk /dev/rdsk/c0t0d0s0
# installboot -F zfs /usr/platform/`uname -i`/lib/fs/zfs/bootblk /dev/rdsk/c0t1d0s0

# zpool set bootfs=rpool/ROOT/sol10u11sparc rpool

Then just… reboot

 

 

# flar split flarfile.flar

# mv archive archive.Z

# uncompress archive.Z

# cat archive | cpio -ivt

# cpio -ivdm opt/tivoli/* < archive

if your “remotehost” solaris  server cannot mount your “nfsserver” ‘s mountpoints, you can tunnel nfs over ssh

from the nfsserver

# ssh -R "3049:localhost:2049" remotehost

once in the “remotehost”

# mount -o port=3049 nfs://localhost:/nfs/share /mount/point

 

to get an address

ifconfig nxge0 plumb
ifconfig nxge0 dhcp start
ifconfig nxge0 dhcp status

http://docs.oracle.com/cd/E19253-01/817-1985/mirror-1/index.html

remember to fsck after umounting the metadevice

this is over nxge4 and nxge10, vlan503 and vlan800, IMPORTANT: reboot after placing files

 /etc/hostname.nxge503004
 crmdev41/26 netmask + broadcast + group crmdevnew1 deprecated -failover up
 addif crmdev/26 netmask + broadcast + failover up

/etc/hostname.nxge503010
 crmdev42/26 netmask + broadcast + group crmdevnew1 deprecated -failover standby

/etc/hostname.nxge800004
 crmdev11/26 netmask + broadcast + group crmdev10new deprecated -failover up
 addif crmdev10/26 netmask + broadcast + failover up

/etc/hostname.nxge800010
 crmdev12/26 netmask + broadcast + group crmdev10new deprecated -failover standby